Democratic Republic of the Congo
Heidelberg Speedmaster offset printing press units
Heidelberg presses, parts & consumables · Democratic Republic of the Congo

Heidelberg offset printing machines in DR Congo. Presses, spare parts, inks and service.

New and used Heidelberg Speedmaster presses, original spare parts — including for GTO and older Speedmasters — technical service and offset consumables for printers in Kinshasa, Lubumbashi and Goma, and across DR Congo.

Heidelberg presses, parts & inksOne supplier for your whole pressroom
150+ Heidelberg presses installedAcross our region, over forty years
Original spare partsGTO · SM 52 · SM 74 · SM 102 · CD 102
Offset printing in DR Congo

Printing machines for Kinshasa, Lubumbashi and all of DR Congo.

The Democratic Republic of the Congo is one of Africa’s largest and most populous countries, with printers in Kinshasa, Lubumbashi, Goma, Bukavu and Kisangani producing school textbooks, packaging, labels, election material and commercial print.

Distances are long, so we plan delivery region by region: through Matadi for Kinshasa and the west, and through East or Southern African corridors for Lubumbashi, Kolwezi and the east.

Typical work

School textbooksPackagingLabelsElection materialCommercial printAdministrative forms

Looking for the Republic of the Congo (Brazzaville)? ↗

01 / Presses — new and used

Heidelberg printing presses for DR Congo.

From a compact Speedmaster SM 52 to a B1 Speedmaster XL 106, Patrick Mace helps you choose the offset press that fits your work, sheet format and volumes — new, or an inspected used Heidelberg — with delivery, installation and operator training in DR Congo.

Heidelberg Speedmaster CX 104 offset printing press line during installation by Intergraph
Heidelberg Speedmaster CX 104 installed by Intergraph technicians — photographed on site.

Speedmaster SM 52

Max. sheet 37 × 52 cm

Compact B3 press for commercial work, labels and short runs.

Speedmaster SX 74

Max. sheet 53 × 74 cm

B2 press for commercial printing and packaging.

Speedmaster CX 104

Max. sheet 75 × 106 cm

Versatile B1 press for packaging and commercial print.

Speedmaster XL 106

Max. sheet 75 × 106 cm

High-performance B1 press for high-volume packaging and commercial print.

Used Heidelberg presses

Inspected before delivery

Pre-owned Speedmaster presses with installation and warranty options.

Versafire digital presses

LV · LP · LM

Heidelberg digital presses for short runs and personalised print.

One conversation for the complete project.

Tell Patrick what you print today and where you want to take your business.

Prepress · press · finishing

From the first file
to the finished job.

Heidelberg Prinect workflow and CTP in prepress, Speedmaster and Versafire presses, Polar guillotine cutters and Müller Martini binding — one supplier for the whole pressroom.

01 —
Heidelberg Prinect production workflow on a laptop

Prepress

Prepare every job for consistent production, from file preparation to plates and colour control.

Prepress solutions
  • Heidelberg Prinect workflow
  • CTP and plate production
  • Colour management and process advice
02 —
Heidelberg Speedmaster XL 106 offset printing units

Press

Choose the Heidelberg Speedmaster or Versafire configuration for your applications, sheet formats and volumes.

Press options
  • Commercial and packaging printing
  • New and used Heidelberg presses
  • Versafire digital presses for short runs
03 —
Polar N 115 high-speed guillotine paper cutter

Finishing

Take the printed sheet through cutting, folding and binding, matched to the work you produce.

Finishing solutions
  • Polar guillotine paper cutters
  • Folding and postpress
  • Müller Martini saddle stitchers and binders
Intergraph technician connecting a Heidelberg Speedmaster offset press
Intergraph technician working inside a Heidelberg Speedmaster during installation.
02 / Spare parts & service

Heidelberg spare parts and service in DR Congo.

We supply original Heidelberg spare parts for any Heidelberg machine that is not discontinued, and our technicians support printers in DR Congo with installation, maintenance and repairs.

Original Heidelberg spare parts

Rollers, grippers, bearings, electronic boards and wear parts, sourced from Heidelberg for any model still supported. Send the model, serial number and part number — or simply a photo.

Older presses we support

Service and parts for the Heidelberg presses you still run every day:

GTO 52GTO 46SM 52Printmaster PM 52SM 74SM 102CD 102

Installation & operator training

Delivery, positioning, connection, calibration and hand-over by our own technicians, with practical training for your operators.

Maintenance & troubleshooting

Preventive maintenance, fault diagnosis and on-site visits planned for each job.

03 / Consumables

Offset printing consumables in DR Congo: inks, plates, blankets.

Inks, CTP plates, blankets and pressroom chemistry for your Heidelberg — and for GTO presses too. Henri Mace prepares your quotation with delivery to Kinshasa.

Process inks (CMYK)Pantone & special inksCTP platesBlankets & underlaysRollersFountain solutionWashes & cleaningSpray powderPressroom aidsLaminating filmsGTO consumables

Brands in our catalogue include Heidelberg, Agfa, Flint Group, Sun Chemical, Hubergroup, Toyo and Böttcher.

Offset printing inks, CTP plate, inking rollers and fountain solution from the Intergraph consumables range
Working with Intergraph in DR Congo

Delivery and support for DR Congo.

We deliver to Kinshasa, Lubumbashi, Goma, Bukavu, Kisangani, Mbuji-Mayi and Kolwezi. Each quotation confirms the route, lead time and delivery terms.

01

By sea

For Kinshasa, presses and bulk consumables arrive by sea at the Port of Matadi, then travel by road. For Lubumbashi and the east, they go via Dar es Salaam or Durban and the road corridors.

02

Urgent parts by air

Urgent spare parts can fly to N’djili International Airport in Kinshasa or to Lubumbashi.

03

Time difference

Kinshasa is 3 hours and Lubumbashi 2 hours behind Mauritius, so our office hours cover your morning and early afternoon. Office hours: Monday to Friday, 8:00–17:00, Mauritius time.

04

Language

Quotations and support in French.

Your Intergraph contacts

The right person.
One direct conversation.

Presses, spare parts or consumables: message the person in charge on WhatsApp. Mention Democratic Republic of the Congo and your city.

Intergraph Africa LtdGrewals Lane, Anse Courtois, Pailles 11201, MauritiusOffice +230 286 5170Monday–Friday, 8:00–17:00 (Mauritius time)

Your questions, answered.

Where can I buy a Heidelberg offset printing machine in DR Congo?

Contact Patrick Mace on WhatsApp (+230 5251 3740) or at p.mace@intergraphgroup.com. He advises on new Speedmaster presses (SM 52, SX 74, CX 104, XL 106), inspected used Heidelberg presses and Versafire digital presses, and sends a written quotation with delivery to Kinshasa or elsewhere in DR Congo.

Can I get original Heidelberg spare parts in DR Congo?

Yes. We supply original Heidelberg spare parts for any Heidelberg machine that is not discontinued, including GTO 52, GTO 46, SM 52, Printmaster PM 52, SM 74, SM 102 and CD 102 presses. Send Benoit Woo the model, serial number and part number — or a photo — on WhatsApp (+230 5251 1660). Urgent parts can travel by air freight to Kinshasa.

Do you service older Heidelberg presses such as the GTO 52 or SM 74 in DR Congo?

Yes. Our technicians install, maintain and repair current Speedmaster presses and older GTO, SM 52, PM 52, SM 74, SM 102 and CD 102 models, and train your operators. On-site visits to DR Congo are planned for each job.

Do you sell used Heidelberg printing presses in DR Congo?

Yes. Alongside new presses, we offer inspected pre-owned Heidelberg presses with installation and warranty options, delivered to DR Congo. Tell Patrick the sheet format, the number of colours and the work you print.

Where can I buy offset printing ink and CTP plates in DR Congo?

Henri Mace quotes inks, CTP plates, blankets, rollers and pressroom chemistry for printers in DR Congo — for Heidelberg and GTO presses — with delivery to Kinshasa. Send your list on WhatsApp (+230 5258 6524).

How are presses and consumables delivered to DR Congo?

For Kinshasa, presses and bulk consumables arrive by sea at the Port of Matadi, then travel by road. For Lubumbashi and the east, they go via Dar es Salaam or Durban and the road corridors. Urgent spare parts can fly to N’djili International Airport in Kinshasa or to Lubumbashi. Your quotation confirms the route, lead time and delivery terms.

Do you deliver to Lubumbashi, Kolwezi and Goma?

Yes. For Lubumbashi and Kolwezi, goods usually travel by road from Dar es Salaam or Durban; for Goma and Bukavu, through the East African corridors from Mombasa or Dar es Salaam. Kinshasa is served through the Port of Matadi.

Which languages and hours do you work in?

Quotations and support in French. Our office in Pailles, Mauritius, is open Monday to Friday, 8:00–17:00 Mauritius time. Kinshasa is 3 hours and Lubumbashi 2 hours behind Mauritius, so our office hours cover your morning and early afternoon.

Let’s talk about
your next press.